Microduct Connector 5/7/10/12/14mm

5mm/7mm/10mm/12mm/14mm connector

This end stop of pipe is used to seal micro duct at the end in network and other area. It is tranparent.
This end stop of pipe is used to seal the duct at the end.
There are different types according to the diameter of the duct.
14/12mm

12/10mm

10/8mm

7/3.5mm

5/3.5mm

Also our company make other related reducers, endplug.

All the connectors operate safely at blowing pressures of 15 Bar and protect the inner cavity against significant ingress of mud, sand and debris, acid etc.

This product is proved by test that the satisfactory design and material selection ensure good lifetime and stability of performance characteristics.

The connector shall meet all performance requirements over a minimum period of 10 years at the normal condition, even underground.

This end stop of pipe is used to seal micro duct at the end in network and other area. It is tranparent.
There are different types according to the diameter of the duct.

14/10mm

10/8mm

12/10mm

5/3.5mm

7/3.5mm

Also our company make other related reducers, endplug.

All the connectors operate safely at blowing pressures of 15 Bar and protect the inner cavity against significant ingress of mud, sand and debris, acid etc.

This product is proved by test that the satisfactory design and material selection ensure good lifetime and stability of performance characteristics.

The connector shall meet all performance requirements over a minimum period of 10 years at the normal condition, even underground.